Model : LP100SSW
The Manrose LO PROFILE range is available in a WHITE finish, and provides an elegant alternative to a standard fan. It has a modern SLIM design and has a projection from the surface of only 10mm.
Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted.
We offer three options; Standard model with no timer, Timer models which incorporate an adjustable timer and LOW VOLTAGE models are available which are designed to be installed in areas that may be subject to splashing.
This non-timer model is ideal for use in bathrooms and toilets and requires a permanent live and neutral.
Electrical240V ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
LO PROFILE series designed to be mounted on walls or ceilings, through 100mm (4") diameter flexible or rigid pipes. Also suitable for use with the Manrose low profile flat channel ducting systems.
The extract rate of all models is 85m³hr
Maximum pressure: 20 p.a. Fan speed: 2400 r.p.m.
Sound volume: 41.0 dB(A) Maximum operating temperature 40° C.
You might also like...
EAN:Does not apply
GTIN:Does not apply