Manrose MF150T In-Line Mixed Flow 6" / 150mm Extractor Fan with Timer

Offering a ventilation rate of 500m3/hr (metres cubed per hour) or 138L/s (litres per second), the Manrose MF150T is designed for use in large domestic bathrooms or those that experience heavy load. Using 'Mixed Flow' (MF) technology, it combines the air flow characteristics of a 150mm (6 inch) axial impeller with a centrifugal housing, resulting in very high extraction rates and much higher exhaust pressures.

This means that the MF150T can cope with much longer duct runs than a standard axial fan without significant loss of power. This model is supplied complete with an integral over-run timer. Set upon install from 2 - 26 minutes, this features ensures all moisture is removed before switching off keeping the bathroom damp and odour free.

The MF150T is particularly great for bathrooms as the internal grille may be sited directly above the shower or bath, thus extracting steam at source. With no electrics in the bathroom it is easy to install, saving both electrician and decorating costs and since it is situated in the loft or ceiling void noise levels are also extremely low.

An inline fan is installed in the loft or ceiling void above the bathroom (or kitchen etc). Ducting is attached to each end of the fan with one length going to an internal grille in the ceiling of the bathroom and the other going to a grille on the external wall, soffitt or roof.

Duct clamps are used to connect the ducting to each end of the fan and to the spigot of each of the grilles. The back draught shutter may be installed anywhere in the exhaust ducting - that is to say, the ducting which runs from the fan to the outside grille, but is usually situated as near to the outside grille as possible. It's worth pointing out, that the backdraught shutter must be fitted the right way round!

Features

• 6 Inch inline extractor fan with over-run timer
• Mixed flow
• Suitable for mounting in lofts or ceiling voids and for use in applications such as bathrooms, shower rooms, kitchens and more
• Silent operation - Noise is reduced due to the extractor fan being installed in ceiling voids or in the loft
• Can be used with rigid or flexible ducting
• IPX4 rated
• High quality ball bearing
• Long life motor
• Compact dimensions
• Double insulation – no earth required
• Fully building code compliant
• Fully BEAB approved
• Easy installation and maintenance - Fan assembly easily removed from rigid ducting installations using specially designed construction
• Extraction rate: 138l/s
• Maximum Room Rate: 500m³ Per Hour
• Sound dB(A) @ 3m: 35dB(A)
• Width: 226mm
• Height: 252mm
• Depth: 307mm
• Spigot diameter: 150mm
• Warranty: 3 year