Model : DECO100HC
The Manrose RT DECO100H 4" Extractor Fan is Available in BRUSHED CHROME finish, and provides an elegant alternative to a standard fan. It has a modern tile design and can be wall or ceiling mounted.
Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted.
We offer three options; Standard model with no timer, Timer models which incorporate an adjustable timer and Humidistat models are available which are designed to switch the fan "on" as the humidity rises in the bathroom and "off" as it returns to normal level.
This HUMIDISTAT model is ideal for use in bathrooms and toilets and has an integral humidistat and over-run timer adjustable from 1-20 minutes. The fan will switch "on" when humidity is detected, and will run for a pre-determined time after the humidity level has returned to normal. Both the humidity level and the run-on timer can be adjusted to suit.
Electrical240V ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor. It requires both a switched supply and a permanent live.
MotorSingle phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
InstallationDeco series designed to be mounted on walls or ceilings, through 100mm (4") diameter flexible or rigid pipes. Also suitable for use with the Manrose low profile flat channel ducting systems.
PerformanceThe extract rate of all models is 75mhr
Maximum pressure: 20 p.a. Fan speed: 2400 r.p.m.
Sound volume: 41.0 dB(A) Maximum operating temperature 40 C.
You might also like...
Please note that ALL Timer fans require not only a switched live supply to activate the timer, but also a permanent live and neutral supply to keep the fan running once it has been switched "off"
i.e. Three conductors plus earth. Without all of the above, the fan will not function.