Model : Multivent MVDC-MS 443298A
Vent-Axia Multivent MVDC-MS continuous mechanical extract ventilation is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extraction system for a wide range of commercial applications such as stalls in lavatories, fitting rooms and kiosk's. The units can be installed at any angle. Where the ambient air has a high humidity content condensate drains are provided.
With growing concerns about accurate ventilation of properties, the Lo-Carbon Multivent MVDC range offers the option of ‘Close Control’ both in the residential and the commercial sectors. With a DC motor the multi speed Lo-Carbon Multivent is one of the most efficient central extract units in the UK.
The units have two fully variable speeds for trickle and boost, with a switched live (LS) activation for the boost speed. An additional third speed (purge) is available using a second switched live connection.
An acoustic lining is included as standard, ensuring minimum noise levels.
The potentiometer controlled speed selector allows accurate setting of airflow, ensuring exactly the right ventilation rate. This feature also reduces noise, and energy consumption.
|Max Ventilation Rate||400||120|
Motor: A brushless LoWatt Energy Saving DC motor should be used with ball race bearings, greased for life. It shall operate up to an ambient temperature of 40°C and have software fault detection.
Fan: The impeller should be a centrifugal backward curve type, dynamically balanced, mounted directly onto the motor.
Ducting spigots: The unit should have 4-N° 100/125mm outlets to atmosphere. (Can be converted to flat ducting).
Filter: not required.
Condensation: Two 15mm condensate drain outlets on the side of the unit at both the top and the bottom for different mounting positions.
Construction: The unit should be moulded in ABS plastic.
Sound Levels: Refer to above table for maximum performance.
Mains electrical supply: 230VAC 50Hz.
Complies to the following approvals/directives: LVD, EMC, CE and SAP Appendix Q listing.
Features and Benefits
- Best in class Specific Fan Power
- Reduces your carbon footprint
- Recognised in SAP Appendix Q
- Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts
- Complies with Building ADF (System 3)
- Option of wall, ceiling and loft mounting
- Improved controllability
- Switched Live Boost connection
- Fully variable normal and boost speeds
- Ultra quiet - acoustically lined for low noise levels
- Integral humidistat (H version)